Have a look here

http://users.net.yu/~dejan/

simple procedures for newbies

Unlocking using JAF COM emulator :

run JAF com emulator

now select comport using same at the device manager

click activate comport

then run software

you can see this while BB5 logger is running :

Unlock Procedures :

click read phone :

click make log

if you click SPUnlock, this will show

solution :

go to this image and clickBB5 calc

this must SHOW

then go back to bb5 logger and click SPUnlock

then smile if you see this






I hope this procedures helps a lot.

Description made by Nlogomaster from WWW.GSM-TRADERS.COM

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Thats right it can now be done by yourself free of charge!!! and heres how:


Works on 6630, 6680 6681, N70 and N90

******* CONNECTION ******

For this program you need Fbus cable like DK5, CA43 or similar conected to ports from COM1 to COM9.
First unpack zip file and start install.bat

In file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" with any text editor change your COM port setings!


******* USING ********

Program can be started successfully only if is COM port in file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" adjusted properly.



READ PHONE:
***********
Reading info data from phone and making BACKUP file for that phone( Field 308,1).

IMPORTANT DO NOT delete or modify that file because can save your *** if something goes wrong.


WR BACKUP:
***********
With that function can write backup file with Field 308,1 if exist in BACKUP folder.

MAKE LOG:
***********
Function for making log file . With that log file BB5_calc.exe calculating codes for unlock.
Working with BB5 phones with RAP3G v.2.x (6630, 6680,6681,6682,n70,n90).
IMPORTANT phone must be without Sim Card


SP UNLOCK:
***********
Making unlock with codes calculated by BB5_calc.exe.



SP Unlock PROCEDURE


Connect cable to PC and be sure com portis adjusted properly
Start BB5logunlocker.exe
Connect phone and switch on without SIM card
press button READ PHONE and wait until get the message DONE.
If is everything correct you will see info from phone on screen.
Pres button make log and wait until get mesage done.
Log file is in folder LOGS.
Start BB5_calc.exe to make for you PSW file in folder PSW
Press button SP unlock and unlock your phone.

That is all folks



If you got unlock odes from your provider and you used all yours 3 attempts
to enter code via keypad then do the following:
into dir "c:\bb5_unlocker\psw" create a file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones imei
then in that created file enter in the files start "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb"
enter your unlock code and where is "c" enter your logs level number (1-7).
save the file and use "SP UNLOCK" function

working , tested, only on some older models though
ONLY
6630
6680
6681
N70
N71
N90

No news on S40 stuff like the 6233/6131 etc?

Not at the moment, but they're saying that the calculator for this will work on all BB5 phones but some data log needs to be created for these phones.

according to the statment issued by dejan about versions of rap3g
"Logger works for BB5 with rap3g v2.11 to v2.20.
Calculator works for any BB5 phone"
it should work for......

    * Nokia 3110Classic RAPGSM v1.1 PA
    * Nokia 3250 RAGGSM v1.1 PA
    * Nokia 5200 RAPGSM v1.1 PA
    * Nokia 5300 RAPGSM v1.1 PA
    * Nokia 6085 RAPGSM v1.1 PA
    * Nokia 6110Navigator RAPIDO v1.12 PA
    * Nokia 6136 RAPGSM v1.1 PA
    * Nokia 6270 RAGGSM v1.1 PA
    * Nokia 6300 RAPGSM v1.1 PA
    * Nokia 6630 RAP3G v2.10E PA
    * Nokia 6680 RAP3G v2.0E PA
    * Nokia 6681 RAP3G v2.0E PA
    * Nokia 7370 RAPGSM v1.1 PA
    * Nokia E50 RAPGSM v1.1 PA
    * Nokia E60 RAP3G v2.20E PA
    * Nokia E62 RAPGSM v1.1 PA
    * Nokia E65 RAP3G v2.20E PA
    * Nokia E70 RAP3G v2.20E PA
    * Nokia N70 RAP3G v2.20 PA
    * Nokia N71 RAP3G v2.20 PA
    * Nokia N72 RAP v2.21E PA
    * Nokia N73 RAP3GS v2.0E
    * Nokia N80 RAP3GS v2.0E PA
    * Nokia N90 RAP3G v2.11 PA
    * Nokia N91 RAP3G v2.20E PA
    * Nokia N93 RAP3GS v2.0E PA
    * Nokia N93i CEBBO2P (RAP3GS)
    * Nokia N95 RAPIDO v1.11 PA

1. Connect DKU-5 or normal COM cable to computer
2. Set proper COM cable (must be, between 1 and 9)
3. run `install.bat`
4. Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg and write here proper COM port (1-9)
5. Run c:/bb5 unlocker/BB5logunlocker.exe
6. Click READ PHONE
7. Click MAKE LOG, log will be created
8. Enter codes to phone (in /psw/ dir), or
9. Click SP UNLOCK to enter codes via FBUS